Product Code: WA48956
Availability: In Stock
£28.00 £36.48
Lawn & Garden Drip Irrigation | Raindrip 1/4-in x 50-ft Drip Irrigation Emitter Tubing WA48956
  • Slowly waters the soil around your plants for complete root zone hydration; the dripline emits water along the entire line; Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows

  • Connect 3/4 in. FHT X 1/4 in. Adapter attached to dripline to water source (pressure regulator is recommended); can cut dripline to size and connect sections with the 1/4 in. barbed fittings

  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

  • Lay dripline near plants to water; Periodically check for leaks or damage; twice a year, remove end closures and flush circuits until water runs clear; in cold climates, to winterize completely drain system to prevent damage or splitting

  • Poly tubing, constructed with a durable layering method: the outer layer, and the inner layer, is made of 100% virgin content; the middle layer, composed of recycled content, 1/2 GPH non pressure-compensating emitters

  • Turbulent flow design flushes out sediments which can potentially clog emitters; flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs; tubing can be cut to desired length

  • Dripline tubing made of polyethylene; emitters made of polyethylene and silicone; all treated with UV inhibitors to prevent cracking; Barbed fittings made of Acrylonitrile Butadiene Styrene (ABS), treated with UV inhibitors to prevent cracking

  • 50 ft. of 1/4 in. Dripline preassembled with 1/2 GPH drippers; 5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs; Use with a 3/4 in. FHT X 1/4 in. adapter to connect to water source

  • Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling

Give your plants complete root zone hydration with the Drip-A-Long™ 1/4 in. Dripline Kit. Comes with a 50 ft. coil of 1/4 in. dripline tubing, preassembled with fittings. The non-pressure compensating emitters inside the dripline are spaced 12 in. apart and emit water along the entire line. The kit also includes tees, elbows, and couplings. Connects to an outside faucet or hose bibb with included 3/4 in. FHT X 1/4 in. adapter; using a pressure regulator is recommended (sold separately). Dripline tubing and emitters made of polyethylene; fittings made of acrylonitrile butadiene styrene (ABS); all treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. The Drip-A-Long Dripline features non-pressure compensating emitters, which can vary in water flow based on length of tubing or elevation, with higher flows closer to the water source. The dripline, also known as a dripperline, uses 1/4 in. tubing with a 0.170 in. internal diameter (ID) and 0.250 in. outside diameter (OD). Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Related Products